| Bush-Whacker T-180 Flex-Wing Rotary Cutters |
| Model |
T-180 |
| Gearbox |
540 or 1,000 RPM
Three spindle gearboxes, 190 HP, base mounted, 1:1.47 ratio.
One divider box, 250 HP, base mounted. All gearboxes have malleable housings, forged alloy steel, carburized and hardened gears and shafts, tapered and ball bearings. 20 splined 1 3/4" input shaft, 2 1/8" output shaft on spindle boxes. |
| Drive Shafts |
Shielded PTO's made from the finest quality propeller shaft material and needle bearing universal joints. Cat. 5 main input and intermediate drive shafts. Cat. 4 wing drive shafts. Cat. 5 80 degree constant velocity main drive shaft optional. |
| Slip Clutch |
Three heavy duty clutches with spring type adjustment and four friction disks. |
| Blades |
1/2" by 4" material, alloy spring steel, airlift design, free swinging when encountering obstructions, 8 inch overlap for better cutting. Blade tip speed 15,500 fpm. |
| Wheels |
Six solid rubber (notat) tires standard. Independent shock absorbing system for all wheel axles. Optional: aircraft tires or implement tires. |
| Turner Special Deck |
3/16" Material
Heavy duty, one-piece electric welded frame for wings and center section, 1/4" rolled I-Beam sides, heavy mechanical tubing structurals. |
| Hydraulic Adjustments |
Hydraulic cylinder controls cutting and traveling height adjustments. Hydraulic lift cylinders control raising and lowering of flexible wings (winch assembly for manual wing lift is optional). Wings may be raised to 90 degrees above horizontal and lowered to 22 degrees below horizontal cutting plane. Optional: rephasing level lift systems. |
| Chain Guards |
Front and Rear. |
| Dimensions |
Cutting width: 15 feet.
Cutting height: adjustable from 2" to 15".
Overall width: 190 inches. Overall length: 167 inches.
Transportation width: 88 inches.
Cutting height for aircraft and implement tires: 2" to 17". |
| Weight |
Without chains and tires: 4,260 lbs.
With standard tires and single curtain chains: 4,990 lbs. |
| Other Standard Features |
Replaceable center and wing skid shoes, transport locking bars for each wing, heavy duty tongue assembly with dual leveling rods, hydraulic hose holder, jack for easy hookup and unhooking from tractor. |