| Bush-Whacker T-240 Flex-Wing Rotary Cutters |
| Model |
T-240 |
| Gearbox |
540 or 1,000 RPM
Three spindle gearboxes, 190 HP, base mounted, 1:1.47 ratio.
One divider box, 250 HP, base mounted. All gearboxes have malleable housings, forged alloy steel, carburized and hardened gears and shafts, tapered and ball bearings. 20 splined 1 3/4" input shaft, 2 1/8" output shaft on spindle boxes. |
| Drive Shafts |
Shielded PTO's made from the finest quality propeller shaft material and needle bearing universal joints. Cat. 5 main input drive shaft. Cat. 4 intermediate and wing drive shafts. Cat. 5 80 degree constant velocity main drive shaft optional. |
| Slip Clutch |
Three heavy duty clutches with spring type adjustment and four friction discs. |
| Blades |
1/2" by 4" material, alloy spring steel, airlift design, free swinging when encountering obstructions, 8 inch overlap for better cutting. Blade tip speed 17,500 fpm. |
| Wheels |
Six solid rubber (notat) tires standard. Independent shock absorbing system for all wheel axles. Adjustable from 24" to 40" crop row centers. Optional: aircraft tires or implement tires. |
| Turner Special Deck |
3/16" Material
Heavy duty, one-piece electric welded frame for wings and center section, 1/4" rolled I-Beam sides, heavy mechanical tubing structurals. |
| Hydraulic Adjustments |
Rephasing hydraulic cylinders control cutting and traveling height adjustments for center and wing sections. Hydraulic lift cylinders control raising and lowering of flexible wings (winch assembly for manual wing lift is optional). Wings may be raised to 90 degrees above horizontal and lowered to 22 degrees below horizontal cutting plane. |
| Chain Guards |
Front and Rear. |
| Dimensions |
Cutting width: 20 feet.
Cutting height: adjustable from 2" to 15".
Overall width: 247 inches. Overall length: 227 inches.
Transportation width: 111 inches.
Cutting height for aircraft and implement tires: 2" to 17". |
| Weight |
With standard tires and single curtain chains: 6,800 lbs. |
| Other Standard Features |
Replaceable center and wing skid shoes, transport locking bars for each wing, heavy duty tongue assembly with dual leveling rods, hydraulic hose holder, jack for easy hookup and unhooking from tractor. |