| RC60 Series Rotary Cutter Specs |
| Model |
RC6015 |
RC6010 |
RCB6015 |
| Hitch |
Pull-Type, Self-leveling Hitch & Clevis |
| Working Width |
15' |
10' |
| Overall Width |
15'8" |
11' |
| Min. Transport Width |
8' |
| Overall Length |
15'1" |
| Cutting Height |
2" - 14" |
| Cutting Capacity |
4" |
| Machine Weight |
4,720 lbs with front and rear chains |
3,850 lbs |
| Maximum Turning Angle |
80o with Constant Velocity U-Joint |
| Deck Height |
10-1/2" |
| Deck Material |
3/16" |
3/16" solid welded |
| Deck Rings |
Optional |
| Side Thickness |
1/4" |
| Skid Shoes |
1 each wing, 2 on center section, Replaceable |
| Tires |
Laminated, Used Aircraft, or 15" Rims |
5 or 6 |
6 or 8 Foam optional |
| Hydraulics |
Wings: 3" x 12" Cylinder, Hoses & Fittings
Axle: 3.5" x 8" Cylinder, Hoses, Fittings and Stroke Control Spacers |
| Gearbox |
540 or 1000 RPM: 235 HP Divider, 210 HP Center & Wings |
| Gearbox Output Shaft |
2 3/8" |
| Gearbox Input Shaft |
1-3/4" 20 Spline |
| Minimum Tractor HP Rating |
50 HP |
| Maximum Tractor HP Rating |
235 |
| Input Driveline |
Star Shaped CV U-Joint or Star Shaped Conventional U-Joint; 540 & 1000 RPM: Cat. 5 |
| Connecting Drivelines |
Star Shaped CAT. 5 Slip-Clutch |
| Stump Jumper |
3/16" Round, Dish shaped w/ 1" steel plate support |
| Blades |
1/2" x 4" Heat Treated Free Swinging Alloy Steel w/Uplift |
| Blade Tip Speed |
540 RPM: 15,268 fmp on center, 15,000 fpm on wings
1000 RPM: 15,578 fmp on center, 14,620 fpm on wings
|
| Blade Overlap |
6" |
| Shielding |
Front: Single or Double Chain or Rubber
Rear: Single or Double Chain or Rubber |
Dual chain with cable
Front and Rear |
| Shock Protection |
Spring Cushioned Axle |